-
gregc320
- Posts: 6
- Joined: Tue Jul 14, 2020 5:03 pm
Post
by gregc320 » Wed Feb 22, 2023 5:28 pm
Hi guys,
Experiencing a lot of issues with jetways in Barcelona. (See below) I'm getting this issue at every jetway on T1 .. it doesn't go down to the door height.
On T2 - the jetway goes around the aircraft and connects to the right service door for some reason.
Any help appreciated.
Regards,
Greg
-
RicardoLVFR
- Site Admin
- Posts: 4286
- Joined: Thu Sep 20, 2018 12:35 am
- Location: Orlando, FL
Post
by RicardoLVFR » Wed Feb 22, 2023 6:38 pm
Have you tried a different plane? it may be the way it interacts with that plane specifically.
Ricardo Morillo
Managing Director/Owner
-
gregc320
- Posts: 6
- Joined: Tue Jul 14, 2020 5:03 pm
Post
by gregc320 » Thu Feb 23, 2023 9:20 pm
RicardoLVFR wrote: ↑Wed Feb 22, 2023 6:38 pm
Have you tried a different plane? it may be the way it interacts with that plane specifically.
I believe it does work okay with Airbus as the door is higher but regardless, the jetway should come down to the door no? I don't seem to have this issue with other jetways and this aircraft?
-
RicardoLVFR
- Site Admin
- Posts: 4286
- Joined: Thu Sep 20, 2018 12:35 am
- Location: Orlando, FL
Post
by RicardoLVFR » Fri Feb 24, 2023 12:55 am
The airbus door (320) is just slightly higher.
The jetway should dock to the door sucessfully and correctly, that's why I asked if you can try another plane. Are you using GSX did you change the door parameters?
Ricardo Morillo
Managing Director/Owner
-
gregc320
- Posts: 6
- Joined: Tue Jul 14, 2020 5:03 pm
Post
by gregc320 » Sat Feb 25, 2023 3:42 pm
RicardoLVFR wrote: ↑Fri Feb 24, 2023 12:55 am
The airbus door (320) is just slightly higher.
The jetway should dock to the door sucessfully and correctly, that's why I asked if you can try another plane. Are you using GSX did you change the door parameters?
I tried it using the Fenix yes and it docked correctly. It just doesn't seem to lower to the 737 door.
I haven't edited the 737 profile from the one that came with GSX if that's what you're asking? I might try and mess around with it and see if it fixes it.
-
gregc320
- Posts: 6
- Joined: Tue Jul 14, 2020 5:03 pm
Post
by gregc320 » Tue Feb 28, 2023 9:06 pm
RicardoLVFR wrote: ↑Fri Feb 24, 2023 12:55 am
The airbus door (320) is just slightly higher.
The jetway should dock to the door sucessfully and correctly, that's why I asked if you can try another plane. Are you using GSX did you change the door parameters?
Hi Ricardo,
Just an update, didn't manage to fix it. Not sure what the issue is. Jetways elsewhere seem to work no problem it just has an issue with the 737 for some reason.
I did a little research on it (google) haha and it seems to be an issue other people have too as you can see at the start of Cpt Canada's video:
https://www.youtube.com/watch?v=H61Z-Xh ... =CptCanada
Not a terribly bad issue, but would be nice if it was addressed.
Thanks,
Greg
-
RicardoLVFR
- Site Admin
- Posts: 4286
- Joined: Thu Sep 20, 2018 12:35 am
- Location: Orlando, FL
Post
by RicardoLVFR » Wed Mar 01, 2023 2:31 pm
Thank you, will look into this and see how we can fix it.
Ricardo Morillo
Managing Director/Owner
-
gregc320
- Posts: 6
- Joined: Tue Jul 14, 2020 5:03 pm
Post
by gregc320 » Thu Mar 02, 2023 4:50 pm
RicardoLVFR wrote: ↑Wed Mar 01, 2023 2:31 pm
Thank you, will look into this and see how we can fix it.
Thanks Ricardo, appreciate it. Lovely scenery other than that
-
mawilso09
- Posts: 1
- Joined: Thu Feb 08, 2024 1:29 pm
Post
by mawilso09 » Thu Feb 08, 2024 1:31 pm
Hi - I am having the same issue with the PMDG 737. Has there been a fix for this at all?
