Page 1 of 3

KBWI weird dust and spark effect

Posted: Fri May 27, 2022 1:17 am
by Dhood320
Good evening from the USA

When I am on takeoff or taxing down Runway 15R at KBWI I get this weird dust and spark effect upon reaching just short of Taxiway F on 15R that doesn't go away. I believe it is an issue with the mesh but I can't figure it out. My mesh setting is at 2M as recommended and I have ORBX FTX global and OpenLC North America installed. Any help would be appreciated. Attached is a link to the picture of the aforementioned effect happening.

https://drive.google.com/file/d/1gzUi_7 ... sp=sharing

Re: KBWI weird dust and spark effect

Posted: Fri May 27, 2022 11:45 am
by RicardoLVFR
Is that the only point on which that happens?

Re: KBWI weird dust and spark effect

Posted: Fri May 27, 2022 3:28 pm
by Dhood320
It happens there and exiting off on taxiway foxtrot. It also happens around concourse B facing 15R. The other side of concourse B and the rest of the terminals seem fine but that Northwest portion of 15R prior to runway 10/28 seems to be where that issue is prone to happening. I have seen other people post about this in other forums but could not find a solution,

Re: KBWI weird dust and spark effect

Posted: Tue Jun 07, 2022 7:33 pm
by Dhood320
Update: This bug only happens when the spring and summer months are selected for KBWI as well.

David Hood

Re: KBWI weird dust and spark effect

Posted: Wed Jun 08, 2022 1:21 am
by RicardoLVFR
Dhood320 wrote:
Tue Jun 07, 2022 7:33 pm
Update: This bug only happens when the spring and summer months are selected for KBWI as well.

David Hood
ok thanks for that info

Re: KBWI weird dust and spark effect

Posted: Thu Aug 18, 2022 2:01 pm
by jafo_326
Greetings !!!

The same is happening to me as I come out of the GA ramp and join taxiway Q, K, L, P and a portion of B as well as 15L.
is there a solution for that problem???

Thank you

Jahil

Re: KBWI weird dust and spark effect

Posted: Thu Aug 18, 2022 3:57 pm
by WBarry1992
Is there a fix for this yet?

Re: KBWI weird dust and spark effect

Posted: Thu Aug 18, 2022 7:23 pm
by RicardoLVFR
What mesh settings do you folks use?

Re: KBWI weird dust and spark effect

Posted: Thu Aug 18, 2022 10:03 pm
by WBarry1992
RicardoLVFR wrote:
Thu Aug 18, 2022 7:23 pm
What mesh settings do you folks use?
2M

Re: KBWI weird dust and spark effect

Posted: Mon Nov 28, 2022 9:21 pm
by Sabretooth78
I am seeing this consistently at KBWI as well. I don't typically fly in spot view, but on replays it seems to happen shortly after landing. Doesn't seem to matter where. It then persists throughout the airport.

When loading into the sim, the plane will load at the gate already throwing sparks.

This only seems to happen at KBWI - I've never seen it before at other 3rd party airports (including others by LVFR). These flights will not show this effect at other airports on these same flights.

I tend to only use KBWI on SWA flights flying the PMDG NGXu and rwys 10/28 and 15R/33L; "A" and "B" gates. The PMDG is reporting no failures and it appears to be a purely cosmetic issue not generally visible from the cockpit.

Mesh is set to 10m.